MrZippy
Climb, swing and zip hands-free with Mr.Zippy. Includes Mr.Grippy throwable climbing supports and built-in storage.
| Date uploaded | 2 hours ago |
| Version | 0.9.3 |
| Download link | quaternion-MrZippy-0.9.3.zip |
| Downloads | 22 |
| Dependency string | quaternion-MrZippy-0.9.3 |
This mod requires the following mods to function
BepInEx-BepInExPack_H3VR
BepInEx pack for H3VR. Preconfigured and ready to use.
Preferred version: 5.4.1700README
Mr.Zippy

Mr.Zippy is a climbing harness for H3VR. Clip onto a ladder to free up both hands, ride a zipline, or rappel off a roof. If there's nothing to clip onto, throw Mr.Grippy to make a climbing hold.
Current version: 0.9.3 (changelog)
Mr.Zippy
- Install the mod and its dependencies with r2modman or Thunderstore Mod Manager.
- In the item spawner, open Misc > Utility > Mr.Zippy. Equip the kit in your backpack slot. It comes with a field manual.
- Hold Trigger over the hook at the front of your belt. Move it over a ladder or climbing hold. When the hook turns blue, release Trigger to clip in. You can also throw the hook.
Locked holds the length you set. Unlocked lets the reel take in or pay out line as you move. The reel holds 30 metres by default. At full length it catches a fall. If you grab another climbable and pull yourself past that limit, the hook comes free.
The line wraps around walls and moving platforms. On a zipline, use the brake to stop the hook. You can still swing underneath it.

The kit has one Huge slot at the back and a Large slot on each side. Grab it at the backpack mount to take it off. Dropping the kit reels the hook back in.
Controls
Use an empty hand. For each directional shortcut, tilt the thumbstick in that direction and click it.
| Where | Input | Action |
|---|---|---|
| Hook | Hold Trigger, then release | Pick up the hook. Release on a highlighted hold to attach, or let go mid-swing to throw it. |
| Line | Grip | Hold your hand steady on the line. |
| Line | Grip + Trigger | Pull toward yourself to climb. Push toward the anchor to pay out rope. |
| Belt point | Grip | Keep your hand on the controls while you move or look around. |
| Belt point | Left or Right | Left toggles the line lock. Right toggles the zipline brake. |
| Belt point or gripped line | Up or hold Down | Up retrieves the hook. Holding Down reverses the lock until you release the click. |
| Belt point | Hold Grip + Trigger, then click the thumbstick | Move the belt point with your hand. Release either button to save its position. |
| Planted Mr.Grippy | Grip, then Down to remove | Grip to climb. Click Down while gripping to pull it out. |
Mr.Grippy
Throw Mr.Grippy into a wall and grab the handle to climb. Clip your hook through its eye before throwing to use it as a grappling hook. The line pays out until Grippy sticks, then goes back to your lock setting. It fits a Medium slot and can be spawn-locked.

MZ69 Grip / VOG-69 Grip
The MZ69 Grip fits the M203. The VOG-69 Grip fits GP launchers. Both fire a permanent climbing hold. To take your line with it, clip the carabiner to the round before loading. Find both rounds in the ammo panel or under Mr.Zippy's related items.

Mod options
After the first launch, open BepInEx/config/quaternion.MrZippy.cfg to change the rope length, haul speed, swing damping or hook pickup radius. This is also where Mr.Zippy saves the belt position you set in VR.
Held Gun Wall Reaction lets you push off a wall with a held gun while hanging. Supported locomotion modes are TwinStick, Armswinger and SingleTwoAxis.
Changelog
- 0.9.3 (current) The rope wraps around scenery and skips loose equipment. The kit spawns with its manual. Find it in the spawner as Mr.Zippy.
- 0.9.2 Updated the field manual artwork and turned the side slots muzzle-down.
- 0.9.1 Set the default rope length to 30 m, simplified hauling and fixed the belt lock indicator.
- 0.9.0 Added rope wrapping, belt collisions and both support rounds in the ammo panel.
- 0.8.x Updated the support round models, laser pickup and line controls.
- 0.7.x Added grappling with Mr.Grippy, launcher-fired supports and thumbstick controls on the belt.
- 0.6.x and earlier Added the harness, throwable hook, zipline brake, storage slots and Mr.Grippy.
Feedback
For feedback or support, join the H3VR Homebrew Discord server and look for @quaternion. When reporting an issue, include your BepInEx log, mod list and steps to reproduce it. For movement issues, include your locomotion mode, controller type and any changed harness settings.
Credits
- Anton Hand and RUST LTD. for H3VR.
- The H3VR Homebrew community, and the maintainers of BepInEx, Harmony, MeatKit and Sodalite.
- Rudmer_Rotteveel for Karabiner_Click_04 and Karabiner_Click_01, and CapsLok for Tools Ratchet, under CC0 1.0. Recordings are excerpted and processed for playback.
- Benboncan for Hand Winch Quick Release.wav, under CC BY 4.0. Adapted through trimming, mono conversion, level changes and layering for the breakaway cue. No endorsement is implied.
- Ovani Sound for licensed recorded foley used in the rope and Mr.Grippy mechanism sounds. These recordings are embedded game assets and are not included under an open-source license.
The package includes THIRD-PARTY-NOTICES.md with the full asset and license details.
Support
Tips and donations are welcome on Ko-fi. You can find my other projects and links at quaternion7.github.io.
Disclosure
I use AI and LLMs to help speed up development. I have a full-time job, and these tools make it practical to keep building and maintaining mods in my spare time.
My background in game development predates today's AI tools, and I have the skills to do this work without them. I choose to use them because they save time and let me focus more on gameplay, hands-on setup, testing, and polish. The design decisions, review, and responsibility for the finished mod remain mine.
CHANGELOG
Changelog
0.9.3
- The item spawner lists the kit as Mr.Zippy under Misc > Utility. Updated the README banner and added gameplay stills of the zipline, Mr.Grippy and both support rounds.
- The kit spawns with its manual. Removed the automatic construction hat from both spawner placement modes.
- Rope wraps and belt contacts query solid Environment-layer scenery, including moving platforms. Loose items no longer redirect the line.
- Reuse physics query buffers and transform edge endpoints once when finding a bend.
0.9.2
- Replace the companion card with the approved atomic-age field manual and its scannable donation QR.
- Pitch both Large side slots 90° so stored pistols sit muzzle-down with the tops of their slides facing forward. The Huge rear slot carries items across the back.
0.9.1
- Orient the rear Huge and both side Large slot contents relative to the wearer.
- Fit the MZ69 pickup and solid colliders to the casing when spent.
- Use haul-only line input, with a 30 m default and a belt lock icon that displays the saved toggle.
- Spawn a separate yellow construction hat alongside the kit and its manual.
0.9.0
- Route the rope around collision edges, with multiple moving contacts, frictional sliding and automatic unwrapping. Level geometry, moving platforms and loose props are supported; movable guides exchange translational/angular momentum with the rope.
- Add bounded-point and haul-only line modes for live configuration A/B testing. Hand targets use rig-relative movement, with shared force and winch-speed limits. Capturing a line no longer introduces a hook-offset positional kick.
- Line UP-click retrieves and held DOWN-click reverses lock using grip alone. Trigger remains the hauling/point-force input.
- Add swept belt and rope-point collision, native penetration recovery, corner handling and finite-mass impact reactions. Preserve native collision authority and snap-turn momentum.
- Increase fresh-config rope capacity to 15 m and double default thrown Grippy blunt damage/stun. Existing user config values remain intact.
- Integrate approved 55 mm / 18 mm support shafts, native-style VOG neck/shoulder and worn-metal finishes, with refreshed thumbnails. Both shells fire at 55 m/s while retaining native kinetic damage.
- Expose MZ69 Grip and VOG-69 Grip in the native Ammo Spawning Panel; preserve default/other ammo classes. Keep collision-blocked shell retrieval working with routed ropes.
0.8.4
- Integrate the approved MZ69 Grip and VOG-69 Grip primer finish: recessed seams, stepped GP baseplate and ignition ports, mottled steel, micrograin and varied roughness.
- Refresh shell spawner renders and retain the 18 mm / 40 mm shaft, existing mesh/UV data and runtime triangle counts. All 0.8.3 controls and behavior remain included.
0.8.3
- Add grip + trigger + held thumbstick DOWN-click on the line to temporarily reverse the saved lock setting, matching the belt control. Release click, trigger or grip to restore normal handling. The override can release the manual line constraint for rappelling and appears on the belt display.
- Primer refinements remain review-only; the installed shell textures are unchanged.
0.8.2
- Hide the controller during rope grips. Trigger frees its visual pose and places the rope bend at the tracked interaction point; releasing trigger returns to the steady line grip.
- Grip + trigger + clicked thumbstick up retrieves the carabiner.
- Transfer native wall-contact impulses from held physical items, including the M320 and other attachment-style launchers.
- Retrieve in the belt's moving frame with a bounded rope length, so fast movement cannot prolong retrieval.
- Thrown Mr.Grippy hits inflict kinetic-energy-scaled native blunt damage and stun, once per Sosig per throw.
0.8.1
- Restore manual laser pickup while retaining one solid pickup/physics collider. Laser retrieval faces the reader; direct grabs and hand transfers preserve the chosen rotation through the native grab-point setting.
- Let the grab laser pass through Zippy's hook, line and belt point while keeping the belt body selectable. Keep world occlusion and other objects' laser behavior intact.
- Play Grippy's detach cue on laser retrieval, recess planted crowns 3 mm into the surface and add native blue handle-hover volumes to both support items.
- Integrate the user-selected 18 mm diameter / 40 mm shaft, with a matching collar, adjusted tether/contact references and visible hover radius.
- Name the rounds MZ69 Grip and VOG-69 Grip. Match native -40/-50 mm chamber origins, correct M203 rim diameter and add original baked primers/base details.
- Reduce both projectile launch speeds 35% to 97.5 m/s, retaining base kinetic impact energy through ballistic mass compensation. Carried item weight is unchanged.
- Clean up failed, non-reusable projectile debris using spent-shell timing, capped at 30 seconds, and release any remaining tether.
0.8.0
- Rework GL Support shading with a supersampled 1024 px normal bake, matching Blender/runtime triangulation and authored MikkTSpace tangents. Preserve tangent handedness through the Unity coordinate conversion.
- Replace irregular cup/eye reduction with uniform curves and match high/low circular geometry for baking. Put primary rim/neck bevels in geometry. Loaded rounds are 1,996/1,932 triangles and the shared support is 908.
- Import the normal map without block compression and use trilinear/anisotropic filtering. Refresh both spawner images and add close-up diagnostic renders.
0.7.4
- Add GL Support rounds for native 40x46 mm launchers and 40 mm caseless GP launchers, including ammo-class registration, native loading/palming/spawn locking, individual perspective thumbnails and Mr.Zippy related-item links.
- Launch the approved rigid inverted support cup-forward as a heavy kinetic projectile. Planted supports are permanent movement grab points without pickup/removal controls. Planting uses the game's material-sensitive small-metal hard-impact audio; launcher tails/handling properties are borrowed from native ammo.
- Preserve a pre-attached carabiner through spawn-lock copying, chamber display replacement, unfired ejection and projectile spawning. Automatically reel until planting; a flying shell drags the player at total capacity, with breakaway only when world collision persistently blocks that drag.
- Optimize the approved meshes to 1,450/1,514 triangles per loaded round and 618 for the shared fired support. Use one shared 512 px base-color/normal/metallic-smoothness/occlusion atlas with baked bevel detail.
0.7.3
- Integrate approved pitched Grippy pair A: +5 semitones overall, an additional +5 on the hammer strike, and the reviewed 0.9 playback gain. Integrate the approved roomier belt display.
- Add line grab V2, enabled for playtesting: grip steadies the controller on the line; add trigger to capture a temporary lock and a finite-mass two-segment rope point. Axial movement hauls/pays out the belt-side segment; lateral hand work transfers momentum. Release trigger to keep steady grip; grip release/menu/disable cleans up. Includes sliding-rail coupling and a legacy-control config fallback.
- Transfer real held-firearm world collision impulses to the airborne tethered player using impulse/body mass, without a force multiplier. Ignore grounded/climbing, loose-item, equipment and stale/turn contacts. Add a config switch for the experiment.
- Keep the manual's line-control header accurate for the selected interaction mode through editor-authored text.
0.7.2
- Hide controller geometry while gripping the belt point, retaining native tracking and restoring normal visibility on release or menu cleanup.
- Give the manual one 35 mm solid box for physics and native hand pickup/transfer. Use the native solid-grabbable layer so untouched cards collide with floors and remain accessible after pickup.
- Enlarge the upper/lower belt action icons and use short RELEASE / REVERSE labels; slightly reduce the main left/right icons to make room.
- Keep the approved Grippy B/B sounds while stronger metallic candidates await review.
0.7.1
- Integrate the approved Mr.Grippy P2 model: 15% smaller overall, hooks another 15% shorter, corrected locked angles and an upright stick-grenade held pose. Scale collision/grab volumes and impact crown to match.
- Use the approved stronger recorded attachment B and detachment B cues, preserving their reviewed peaks and playback gain.
- Clip Mr.Zippy to loose, held, pocketed or planted Grippy. A loose Grippy forces effective auto-reeling without overwriting the saved lock preference; planting restores that preference at the current distance.
- Keep the tether through pickup, pocketing, throwing, planting and removal. Spawn-lock pickup transfers it to the native copy in hand. Native Medium size, spawn locking, throwing, velocity alignment, impact audio and climbing remain supported.
0.7.0
- Move clicked directional actions to the belt point: left lock, right slide/brake, up retrieval, held down temporary lock reversal. Grip steadies the controller at the belt point. Rope trigger remains hauling/payout only.
- Add secondary upper/lower belt UI hints and restrict the worn kit pickup volume to its backpack mount.
- Replace the two-sided manual with the approved single-face landscape layout and back watermark; paste a verified donation QR. Thicken its physical/grab volumes, correct fresh spawn orientation and add native light-book impacts.
- Mr.Grippy P2 revisions remain the next implementation slice.
0.6.10
- Integrate the approved diagonal perspective Mr.Grippy item-spawner thumbnail as a transparent sprite.
0.6.9
-
Replace Mr.Zippy's development spawner icon with the approved transparent model render.
-
Add native material-sensitive grenade-can impact audio to Mr.Grippy; retain the approved recorded metal clicks for surface lock/unlock.
-
Turn the crown smoothly toward throw velocity using bounded angular acceleration. Preserve translational velocity and roll; stop assistance on impact, pickup or storage.
0.6.8
- Add Mr.Grippy as a registered Medium, native spawn-lockable climbing support, available independently and through Mr.Zippy related items.
- Plant the impact crown manually or with a native physics throw. Four rigid hook bones deploy when planted and retract when retrieved.
- Grip planted supports to climb; while gripping, thumbstick down + click retrieves it. Mr.Zippy can clip onto the planted grab volume.
- Integrate the approved optimized mesh and baked dark-metal material. Active attachments are not saved.
0.6.7
- Include the approved two-sided manual card with native item-spawner and pen placement through the linked companion definition; expose it as a related item for replacement.
- Paste a sharp, verified donation QR into the approved artwork. Card uses unlit materials, native grabbing, storage and belt locking.
- Restrict Mr.Zippy itself to the backpack slot; its Huge/Large/Large storage slots remain available.
- Integrate adjusted latch geometry and native backpack slot visuals, with the rear Huge slot upright.
- Resume unfinished native slot loading after disabling and re-enabling the kit.
- Rename line-mode labels to LOCKED/UNLOCKED. Default to sliding enabled and allow the belt toggle before attachment.
- Trigger-held line gestures: down + held thumbstick click temporarily reverses lock state; up + click retrieves; right + click toggles sliding. Remove the reel's retrieval interaction volume.
0.6.6
- Hand placement checks the held hook opening and controller point with the same 12 mm tolerance as throws, supporting thin wall grab volumes.
- Blue hook feedback uses the same eligibility/contact check as release.
- Enlarge default hook pickup radius to 9 cm and prioritize a resting hook over belt trigger taps.
- Move rope sheath UVs with actual payout/haul/retrieval, continuously through both spans, preserving hover and shared materials.
0.6.5
-
Keep ratchet pitch increasing with averaged speed beyond the repeat-rate cap; only Unity's native 3x playback bound remains.
-
Play speed-driven, rate-capped payout/haul ratchets when moving the held hook away from/toward the belt.
-
Play the selected detachment recording once as the returning carabiner docks, spatialized at its rest/fixed point after stopping the retrieval loop.
0.6.4
-
Remove the orange outer belt range: all belt controls now share the green 8 cm radius.
-
Selected recorded detachment closing snap, combined elastic/mechanical breakaway, and cleaned retrieval/zipline friction loops.
-
Raised retrieval base pitch to 1.40x and slide base pitch to 1.10x; velocity-driven pitch variation remains active.
-
Cap payout/haul at 15 ticks per second (slower if needed to avoid clip overlap), shared across direction changes, without queued catch-up bursts.
-
Embed licensed library audio in the game bundle; exclude standalone library-derived WAVs from open-source files and credit the CC BY winch recording.
0.6.3
- Integrated user-selected recorded attachment A, payout B and haul B.
- Ratchet pitch follows a 150 ms average rope speed on a separate emitter.
- Added independent rail-motion loop support with velocity-based pitch and brake/detach cleanup; clip awaits user selection.
- Reduced reel retrieval range to 12 cm.
- Prepared new detachment, breakaway, steady rope-friction retrieval and sliding candidates for review.
0.6.2
- Textured both rope spans with a strip baked from the actual coil sheath; matched its 9 mm diameter and retained blue hover feedback.
- Added distinct upper hook contact and lower rope tie/hitch; attached hook aims its rope point toward the belt.
- Held hook uses a lower grip and points upright along the controller interaction axis, with configurable pitch/yaw/roll.
- Reduced front hook pickup to a new 6 cm radius setting; previous backpack reach no longer controls it.
- Recorded audio candidates are private review only; installed sound set A is unchanged.
0.6.1
- Fixed reversed triangle winding on all five imported render meshes.
- Preserve authored normals and textures; audit winding against normals in Unity import and actual-game checks.
0.6.0
- Integrated approved strapless belt/reel, spline carabiner and baked materials.
- Centered held grip and separate lowered backpack pose; rear Huge and side Large storage mounts.
- Editor-authored passive 2D status icons/text replace mesh symbols; clear clamp/slide brake feedback.
- Reel trigger retrieves the carabiner; gate follows its real lower hinge.
- Retained sound set A and existing traversal physics/settings.
0.5.0 - belt controls and physical sliding
- Adopt the latest saved belt coordinates as fresh-config defaults; preserve existing config.
- Belt-point trigger tap toggles reel lock. Attached-carabiner trigger immediately opens/picks it up for direct reclip or throwing.
- Reposition belt using held grip + trigger, then thumbstick click; release either held button to save immediately.
- Add belt thumbstick brake/slide toggle for native CanSlideOn rails, braked by default and reset on detach.
- Couple a finite-mass carriage to native player gravity/momentum through rope tension; support adjacent connected segments and safe terminal stops.
- Add separate padlock and brake/slide blockout icons at the belt point.
- Play payout ratchet on outgoing throws and attachment click on successful hits.
0.4.1 - hook lock control correction
- Attached-hook trigger only toggles reel lock; remove long-hold detachment/pickup. Kit-body trigger remains the explicit detach/retract control.
- Restore climbing-only breakaway beyond total spool capacity. Ground walking, falling, passive displacement and reaching a shorter working length do not detach. Unattached thrown hooks still retract at range/timeout.
0.4.0 - belt dock, reel lock and throwing
- Rest/retrieve the worn hook at the adjustable belt point. Use the user-tested navel height and 30 cm forward as defaults; retain persisted custom coordinates.
- Tap attached-hook trigger to toggle locked/automatic reel mode; hold 0.3 seconds to reposition. New attachments start locked. Green/amber tint shows mode.
- Locked lines do not auto-pay out while grounded/climbing; unlocked lines follow distance in both directions. Full capacity catches without automatic breakaway.
- Trigger-only line hauling; pickup immediately removes slack. Manual adjustment overrides the automatic reel while held.
- Preserve harness pivot/world momentum across native in-place snap turns and reset arm/line sampling.
- Add gravity-driven throws, continuous grab-volume sweeps, configurable two-second miss retrieval and range-limit retrieval.
- Preserve custom mass/damping/range settings.
0.3.0 - second playtest corrections
- Adjustable chest pivot and three-point rope routing; save its offset with trigger + thumbstick adjustment.
- Grounded/climbing movement pays out up to full capacity, retaining length with ratchet audio. Approaching never reels in.
- Manual hauling overrides supported payout, including pulling the player off the ground.
- Empty-hand trigger unlocks/repositions/reclips the hook. Kit trigger releases with the breakaway pluck.
- Increase default damping from 0.08 to 0.65 per second, preserving custom settings.
- Filtered arm/body momentum exchange for airborne pumping/braking, with tracking-jump rejection.
0.2.1 — first sound set
- Integrate the user-selected compact/dry sound set A: attachment, detachment, breakaway, spring retrieval, payout ratchet and hauling ratchet.
- Retrieval pitch rises with spring speed. Payout/hauling use separate ratchet sounds driven by actual rope adjustment.
- Sounds are original procedural audio; final sound polish remains open.
0.2.0 — playtest corrections
- Keep deployed rope length fixed unless the player grabs and moves the line.
- Add hand-over-hand hauling/payout with native blue line hover and thicker highlight.
- Break away only when outward climbing would exceed the full configured capacity, not a shorter deployed length.
- Support Large player slots as well as the backpack slot, with native green harness locking and return-to-slot behavior.
- Double docked trigger reach to a configurable 28 cm and enlarge the attached carabiner's grab volume.
- Wire optional mechanical audio events and rising-pitch retrieval; prepare two original procedural sound sets for review. No clips are selected or packaged yet.
0.1.0 — development
- Begin the first backpack harness: native grab-volume attachment, automatic take-up, constrained swinging and carabiner retrieval.
- Add reproducible Unity editor configuration/build tooling and isolated tether checks.
- Asset review and headset playtesting remain required before release.