Skate 3 Improved
An improved Skate 3 map for ReSkate with original geometry, DLC maps, original decals and material-based surface sounds
By 333
| Date uploaded | a week ago |
| Version | 1.2.2 |
| Download link | 333-Skate_3_Improved-1.2.2.zip |
| Downloads | 61900 |
| Dependency string | 333-Skate_3_Improved-1.2.2 |
README
Skate 3 Improved
An updated version of the Skate 3 map mod for ReSkate.
-
Maps exported straight out of Skate 3. The geometry, layout and props are the originals taken directly from Skate 3, not a hand-rebuilt approximation
-
DLCs included
-
All decals. Every decal from the original maps is included and placed as it was: road markings, parking lines, stains, graffiti and more
-
Real surface sounds. Audio now matches the material you are riding. The same material-based audio as in Skate (4) itself
Installation
Requires skate. with ReSkate installed.
Install the package through the ReSkate launcher and enable it under Mods.
For manual installation, extract the ZIP into its own folder under
<Skate folder>/Mods/, then enable the mod in ReSkate.
Select Skate3Improved in the map menu.
Turning car traffic on or off
- In game, press Insert to open the ReSkate menu (the default menu key).
- Open World and find Traffic under Travel & Population.
- Choose Off, Light, Normal or Busy. Default uses the map's own setting. Recommending Busy.
CHANGELOG
1.2.2
- Added pedestrians
- Reworked the textures
1.2.1
- Deathrace:
- Works together with Skate 2 Improved: with both maps installed, F6 and the OPEN RACE MENU button now open the race menu of the map you are on. Before, F6 could show a "wrong map" message and the button did nothing. Please update both maps
- Safer start grid for many skaters: every start spot is checked before the race, so nobody starts inside a wall or falls under the map. Up to 30 skaters stand in rows behind the start, and the order is mixed every race, so the host is no longer always in front
- The board now stands still during the countdown instead of rolling down a slope
- Direction arrow at the top of the screen: a 3D arrow points to the next gate and shows the distance. Turn it off in the F6 menu under SETTINGS
- The first start of a race puts everyone on the start like RACE AGAIN does, so nobody starts on an object next to the start
- Only the arrows for the part of the race you are on are shown, so arrows for a later part no longer point the wrong way
1.2.0
- Deathrace:
- New race editor: build your own Deathraces anywhere on the map. Press F6 to open it. Change the key or add a controller combo on the plugin's page in the ReSkate menu (Plugins > S3 Deathraces: Record a new key / Record a controller combo), or under Settings > Controls > Plugins
- Invite others to your own races: the race goes with the invitation (everyone needs version 1.2.0). Skaters who rode someone else's race can keep it with SAVE on the results screen
- Fixed two skaters both showing as 1st place when they finished close together
- New F6 menu with three tabs: LOBBIES shows every Deathrace lobby in the session, waiting or racing, and lets you join from there, so two invitations at once no longer get lost. RACES lists the Skate 3 races and your own, SETTINGS holds the plugin's options. The plugin's page in the ReSkate menu has an OPEN RACE MENU button for it too
- Anti-spam: you can start a race with invitations (or a Deathrace throwdown) once every 30 seconds. A message tells you how long to wait. Invitations from the same player also show at most once every 30 seconds
- The direction arrows before the last gate of Downtown Race 1 and after the last gate of Downtown Race 2 now point the right way (they pointed backwards)
1.1.9
- Deathrace:
- The standings on the right now update as soon as you overtake someone (or get overtaken), not only at the next checkpoint, and no longer flicker between places when two skaters ride close together
- Giving up during a race now needs D-pad down held for 1 second (a red bar fills under the hint), so you can no longer quit by accident
- A waiting race lobby stays open when the host or a joined skater rides away from the start. Hold B (Circle) to leave or call it off; the start still puts everyone on the grid
- The direction arrows in the three Industrial races now point the right way (they pointed backwards)
- Fixed the Deathraces turning off in the middle of Downtown Race 2 (many arrows coming into view at once), which hid the race HUD and blocked new races until a restart
1.1.8
- Deathrace:
- All Deathraces are now marked on the pause menu map (yellow flag icons at their start markers)
- New race invitation card at the right edge: the race and its district, who started it, the number of skaters, the time limit and how long you can still join. Hold Y (Triangle) to join or hold B (Circle) to dismiss the invitation
- Sounds: SFX at the finish, and skate.'s menu sounds in the race setup and on the results screen
- The start markers of Downtown Race 1 and Downtown Race 2 are visible again (they were hidden in the ground)
- New warning card in skate. style when you miss a checkpoint or leave the race area: a countdown ring with the seconds left, what to do and where you will be reset
- Fixed the red "missed checkpoint" warning flashing up for a moment when you ride through a gate close to its edge
- Fixed the race card and the progress bar staying on screen after you finished or gave up and closed the results screen
- Fixed the Deathraces turning off right after a race started, before the countdown
1.1.7
Deathrace update.
- New race HUD in skate. style:
- A race card at the top left with the race, your place, a mark for every checkpoint, your time and the time left (red in the last 30 seconds)
- At every checkpoint you see how you compare to your best run at that checkpoint (green ahead, red behind)
- A progress bar at the bottom shows where everyone is on the route
- The standings on the right show the gap to the leader
- The D-pad hints (back to checkpoint, give up) now show under the race card
- Y (Triangle) is no longer blocked near a race start or when an invitation shows: you can always get on and off your board
- Race invitations now show as a small card at the right edge instead of a big pop-up in the middle of the screen
1.1.6
Deathrace update. Note: the multiplayer changes are untested so far, I could only test the races alone. If something doesn't work with others, please let me know. Everyone in the session needs version 1.1.6.
- Added the direction chevrons from Skate 3: glowing ">" arrows at their original places, exactly where Skate 3 shows them in each race
- Gates no longer float in the air or jump up when you get close: they now stand on Skate 3's original gate positions and never move
- Gates and arrows no longer have collision
- Gates can no longer be skipped: if you miss one, you get 5 seconds to go back through it, then you're reset to the last gate you passed
- The 3-2-1 countdown now counts down properly (it stayed on 3 and then jumped to GO) and has skate.'s countdown sounds
- The race clock no longer lags behind
- The D-pad hints (back to checkpoint, give up) now always show at the top right while you race
- The standings on the right now only show while you race and no longer stay on screen afterwards
- Fixed the HUD (checkpoint card and checkpoint pop-ups) not updating when you start a new race right from the results screen
- The results screen no longer closes by itself: press Continue when you're done
- Multiplayer:
- Fixed players not being taken to the start when they accept an invitation (on servers where teleporting is turned off)
- After Race Again, the others can join again: players who are still on their results screen get a "Join" button
- Press B (Circle) in the lobby to cancel the race (host) or leave it
- Lobbies with more than 10 skaters now show the right number for everyone
1.1.5
- Added Skate 3's 10 Deathraces at their original places in University, Downtown and Industrial
- Ride to a race's start marker on the ground and hold Y (Triangle) to set it up: pick the race, the number of skaters and the time limit
- Race alone or with up to 30 others: everyone on the map gets an invitation and holds Y to join, and is taken to the start
- Glowing checkpoint gates with the distance to the next one, the original race objects (kickers, ramps, plywood and more) and a results screen with everyone's times and your personal bests
- Boosts, noclip and custom physics are off while you race
- D-pad up takes you back to the last checkpoint, D-pad down gives up
- Race invitations and chat notices can be turned off in the ReSkate menu (Plugins > S3 Deathraces)
1.1.4
- Added the Super Ultra Mega Park stadium from Create-a-Park: the whole hall with its full park layout. All ramps, rails and objects have their original Skate 3 textures, and the flood lights light up the park
- Added Zen Plaza (San Van Party Pack DLC) with its full park layout and original textures, plus a bus stop to get there
1.1.3
- The added Skate 3 objects (benches, bins, ramps, picnic tables and more) now stand on the ground. Many floated a few centimetres above it, some up to half a metre, so ramps had a lip you couldn't ride up properly
- Objects now sound like what they're made of: bins, dumpsters and barriers sound like metal, picnic tables, benches and pallets like wood, ramps like wood, pylons and plastic tables like plastic. Before, most of them sounded like stone
- University: the community skatepark benches have their metal seats and backrests again (only the frame was there)
1.1.2
- Added the objects that stand around by default in Skate 3: over 1600 benches, bins, newspaper boxes, patio tables and chairs, dumpsters, barriers, drums and kegs, vending machines, bike racks, ramps, rails, hurdles and more, in all districts (original Skate 3 models and textures)
- They are fixed objects with collision: you can skate them, but you can't push them around
- Small litter has no collision, so you don't bump over it
- Glass buildings and facade windows now reflect like mirrors instead of looking dark
- Moved some lamps in University so spots that were blocked can be skated again
- View distance set to 800 m for better performance
1.1.1
- Fixed plain grey concrete, asphalt and wood ramps on the Low and Minimum graphics presets. The detail textures from 1.0.9 are removed for now, because the game draws them grey on these presets
- Downtown: wall lights replaced with Skate 4 lights that match the size and shape of the original Skate 3 ones (small LED rectangles, round domes, slim and box lamps). The old orange housings are gone and no lamp hangs off them anymore
- Art Gallery: fixed falling through the ground where the road fences were removed
1.1.0
- Moved the spawn point away from the Super Ultra Mega Park. Everyone spawning there at once caused lag
1.0.9
- Added detail textures: concrete, asphalt, paving and wood now show fine surface structure up close
- Fixed dark rectangles on some surfaces
- Stains and decals no longer look shinier or duller than the surface they sit on
- Stain layers now also cover the decal surfaces, so they match the concrete around them
1.0.8
- Replaced the Skate 3 street lamps, wall lamps, ceiling lamps and traffic lights with real Skate 4 ones in most districts
- University is the test area for now: there I also added extra Skate 4 lamps. In all other districts only the existing Skate 3 lamps were replaced
- Skate 4 lamps now switch on at night and turn off during the day, like in San Van
- Added a metal halfpipe at the Super Ultra Mega Park
- Removed the fences blocking the streets in Art Gallery
- Removed some other objects
- Fixed gaps in the ground (Money Cup and other spots)
1.0.7
- Improved Textures
1.0.6
- Reduced the number of trees
1.0.5
- Added real Skate 4 trees (testing University district)
- Softer stain and wear decals
- Big FPS boost: far away districts are no longer rendered
- Fixed wrong mountain and rock textures from far away
1.0.4
- Added water
- Added all missing decals: parking lines, road markings and numbers, wall stains, water streaks, painted wall areas and more
- Improved the mountains and rocks
- Improved windows and glass
- Grinding now uses Skate 4's own edge grinding
1.0.3
- Added ambient sounds across all districts
- Fixed distant shadows: shadows no longer pop in 100–150 m in front of you. The map now has its own distant shadow cache areas
1.0.2
- Fixed more collision issues
- Fixed surface sounds: several grounds had the wrong surface (e.g. pebble paving and tiled crosswalks in AG Park now sound and ride like stone instead of gravel or asphalt)
- Added car traffic on the streets of University, Downtown, AG Park and Industrial. Traffic density can be changed in the ReSkate menu (Insert > World)
1.0.1
- Updated map build with additional fixes
- Reworked collision