Cartur's HD Blood

Higher resolution ground blood, and a real burst of blood on every hit and kill.

Ground blood. Vanilla draws its ground blood from a 64×64 texture. Three new 1024 and 512 textures replace it — a different mark for a graze than for a kill, and two large marks alternating so the same shape doesn't repeat. Each has its own normal map, so light catches the strands and the blood reads as wet rather than as a flat stain.

Blood in the air. Most creatures throw nothing into the air when you hit them — 24 of 28 hit effects and 33 of 48 death effects have no burst at all. This gives them one, scaled down for a hit and sized to the creature: a chicken bleeds less than a troll.

Per-creature colour is kept. Neck blood green, greydwarf yellow, boar and deer red. That's the game's own design.

Settings

BepInEx/config/com.jekkle.valheim.carturhdblood.cfg. Applies on a world reload — a trip to the main menu and back.

BloodLevel is the dial to turn. It drives everything, and anything but Custom overrides the three below it — set BloodLevel to Custom first if you want to work those by hand. On that scale 0 is none, 1 is vanilla, 3 is a lot.

Everything else lives under Advanced and you shouldn't need it: droplet size, spread and count, cloud size, pool size and lifetime, wetness, opacity and the material names.

Compatibility

Built and tested against Valheim 1.0.7, BepInEx pack 5.4.2350.

Six methods are hooked: ZNetScene.Awake, ParticleDecal.Awake, Character.ApplyDamage, Humanoid.BlockAttack, Character.OnDeath and Player.OnDeath. The last four are the ones to know about if you run other combat mods. All of them are Harmony prefixes and postfixes that only read — was the hit blocked, which way did it come from, how tall was the thing that died — and then spawn a visual effect. Nothing here changes damage, blocking or death, so a mod that replaces one of those methods outright will stop the blood rather than the other way round.

Blood is identified by material rather than by prefab name, so it should survive a game update. If blood stops appearing after a patch, the material names are under Advanced and can be corrected there without a new build.

Works alongside texture packs, including HD Valheim Textures. Modded creatures are picked up automatically if they use the game's own blood materials; if one doesn't, add its material name under Advanced / DecalMaterials.

Client-side and visual. Nothing is networked, no save data is touched.

Install

Use a mod manager (r2modman / Thunderstore / Gale) and it pulls in BepInEx for you. Manually: drop CarturHDBlood.dll into BepInEx/plugins.

Artwork and design by Cartur.

Free, and always will be. If it improved your game you can tip me on Patreon.

Discord — bug reports, install help, and mod requests. Bug reports get their own thread so nothing is lost in a chat scroll, and requests are voted on.

More from Cartur: Map Pins · Compass and Clock · Safe Stamina · Follow Command · Flooring · UI HUD · Waste Management · Feeding Trough · Build Camera · Combat Text

Changelog

1.4.0

• The blood cloud now fits the creature. The airborne cloud copied onto creatures that have none was sized against the wrong source value, so most clouds came out about twice as big as intended and every large creature hit the same cap.
• Turning GroundFade off now restores the materials it changed, and changing it applies in game without a relaunch.
• Ordinary hits bleed under the same conditions vanilla uses for its own hit effects.
• The copied cloud is no longer re-tuned as if it were one of the game's own blood effects.

Versions 1.2.0 to 1.3.1 were never released; their fire effects are not part of this mod.

1.1.2

• Page only - the mod itself is unchanged from 1.1.1. Adds a link to Cartur's Flooring, so every mod of mine points at the others.

1.1.1

Listing only - no code changed. The only difference in the DLL is the version number stamped into it, so there is no reason to update for this unless you want the new icon.

• New package icon, matching the screenshot used on Nexus.
• The 1.1.0 notes below were written before the last round of ground-blood work and did not describe it. They now do. Nothing in that list is new in 1.1.1 - it all shipped in 1.1.0.

1.1.0

One setting instead of fifteen, and a lot of things that were quietly wrong.

BloodLevel - Low / Normal / High / Extreme / Custom, driving thirteen values together. Touch any slider a preset controls and it switches to Custom on its own, so a slider can never silently do nothing.

Ground blood was drawing at half strength. The material Valheim marks the ground with ships its colour at (0.502, 0.502, 0.502). Vanilla's own reddish texture carried enough colour to survive that; this mod's artwork relies entirely on the creature's blood colour, so half of it was being thrown away. Worth roughly 50% more saturation and brightness.

Look settings could only be changed by restarting the game. Wetness, reflections and the rest were applied in a code path that was skipped once a material had already been set up, so a world reload never reached them while the settings screen implied it had.

Blood no longer appears on a successful block. This mod lowers the bleed threshold from vanilla's tenth of max health to a fiftieth, and the chip damage left after a block cleared that easily.

Ground blood fades out instead of vanishing. Vanilla renders these decals in Cutout, where a pixel is drawn or discarded with nothing in between, so fading the colour just ate the mark from its edges and dropped the rest in one frame. They now blend, and the effect is kept alive long enough for its own marks to finish fading rather than being deleted mid-fade.

Normal maps now actually apply. Three of the four blood materials use _BumpMap, not _NormalTex, so the ground normal map was being written to a property those materials do not have and was silently dropped.

GroundOpacity is the main density control, and it now goes down to 0.2. These decals blend, so overlapping marks stack toward solid - at high opacity two marks are already opaque and no colour underneath can be seen. Lower values let blood soak into ground instead of sitting on top of it.

GroundLighting, for installs running a shading overhaul or a sky replacer. Valheim's outdoor ambient is blue and is added to a surface rather than multiplied by it, so on some setups blood takes the sky's colour and nothing on the material side can win. Off draws each mark in its own colour with nothing added.

Wetness on every blood material rather than the ground alone, and sky reflection is off by default - it was mirroring a pale sky across every splat, which is what made wet blood read white or grey.

Directional spray - blood is thrown away from the blow rather than outward in a ball. Systems that mark the ground are left alone, because those particles have to reach the floor to make a mark.

The settings in force are written to the log at every world load, so a value that is not doing what you expect can be seen rather than guessed at.

New ground artwork, a droplet texture, and a debug section for isolating one element at a time.

Ground blood now scales with the creature, not with the effect. Death pool size follows the dead creature's own collider height, so a boar leaves less than a greydwarf and a troll leaves a great deal more. Two earlier attempts scaled by the effect's authored decal size instead; that inverts, because decal systems are shared child prefabs - a hen and a lox carry the same one.

Marks that piled on the corpse now scatter. Greydwarf, greydwarf elite, neck, bat, deathsquito and tentaroot all carry a death emitter authored to live 0.18 seconds with no gravity, so everything it landed fell inside a 1.8 metre circle. Those now arc and travel. At the other end, the three effects that threw blood past 20 metres are pulled back in, so it lands where the kill happened.

Ground marks are no longer shorter-lived than vanilla. Turning blood down used to cut every mark's lifetime by the same factor, so at a low setting a greydwarf hit mark lasted 1.5 seconds - it landed correctly and then vanished before the fight ended. Less blood now means fewer marks, not marks that blink out. PoolLifetime is absolute seconds and ignores the blood level entirely: 45 means 45.

Hit marks are levelled up to the common size. Six creatures emitted 3 ground-seeking particles where player, boar and wolf emit 5, and six drew a smaller hit mark than everyone else, both at the same 100% chance. Which texture a mark uses is unchanged - that is decided by the size the game authored, not by the size it ends up drawn at.

Upgrading from 1.0.x

Existing config values always win over new defaults, so a few settings keep their old numbers rather than the retuned ones. If ground blood looks too bright or pink, set:

BloodColor    = #470303
BloodTint     = 0.6
GroundOpacity = 0.47
Wetness       = 0.35

Those are the defaults a fresh install now gets.

1.0.1

• The large ground mark no longer ever renders as bare spray on its own - it reads as a thin scatter with no solid body alone, so it's now always paired with the mist or impact art instead.
• Added screenshots and links to my other mods.

1.0.0

First release.

• 1024 and 512 ground blood textures with normal maps, replacing the vanilla 64x64 decal, with separate marks for a graze and for a kill.
• Airborne blood on hits and deaths for the creatures that ship without any.
• Per-creature blood colour preserved.
• GroundBlood / HitBlood / DeathBlood dials on a 0-none, 1-vanilla, 3-a lot scale.