Please disclose if any significant portion of your mod was created using AI tools by adding the 'AI Generated' category. Failing to do so may result in the mod being removed from Thunderstore.
DrainTarPit
A hand pump with hoses to drain tar pits. Put a strainer in the tar, pump with E and watch the level drop while the tar pours from the nozzle. Items in the pit stay. Add WaterAndTarPools to keep the tar in pools and pump water.
By KydlDev
| Date uploaded | 2 days ago |
| Version | 1.0.0 |
| Download link | KydlDev-DrainTarPit-1.0.0.zip |
| Downloads | 81 |
| Dependency string | KydlDev-DrainTarPit-1.0.0 |
This mod requires the following mods to function
denikson-BepInExPack_Valheim
BepInEx pack for Valheim. Preconfigured and includes unstripped Unity DLLs.
Preferred version: 5.4.2202
ValheimModding-Jotunn
Jötunn (/ˈjɔːtʊn/, 'giant'), the Valheim Library was created with the goal of making the lives of mod developers easier. It enables you to create mods for Valheim using an abstracted API so you can focus on the actual content creation.
Preferred version: 2.30.2README
DrainTarPit
A hand pump with hoses to drain Valheim's tar pits. Build a pump, run an intake hose with a strainer into the tar and an outlet hose with a nozzle somewhere else, then work the lever: the tar level drops and the tar pours out of the nozzle. Only the liquid is removed - Tar items, meat or anything else lying in the pit stay where they are, so you can walk in and pick them up once it is drained.
Want the pumped tar to stay, fill your own pools or pump water? Install the add-on WaterAndTarPools (needs this mod).
Pieces (Hammer > KY-Items)
| Piece | Cost | Notes |
|---|---|---|
| Hand pump | 10 Wood, 5 Iron, 4 Leather scraps, 5 Resin | Intake and outlet snap points, a lever and a place to stand |
| Intake strainer hose | 2 Iron, 2 Leather scraps, 2 Tar | The end that goes into the tar |
| Outlet nozzle hose | 2 Iron, 1 Leather scraps, 2 Tar | The tar comes out here |
| Hose (1 m) | 1 Leather scraps, 1 Tar | |
| Hose (2 m) | 2 Leather scraps, 2 Tar | |
| Hose elbow | 2 Leather scraps, 2 Tar | 90 degree bend |
Chain the hoses with their snap points. Tilt a held piece with Alt + scroll (pitch), Alt + Ctrl + scroll (roll) and Backspace to reset (keys configurable). Pieces only break when hit: no support, rain or fire damage.
Using the pump
- E on the pump: step up to it. E again = one stroke. Hold E = keep pumping until you let go.
- Shift + E, Space or walking away: step off. Getting hit throws you off the pump.
- The hover text shows whether the intake and outlet chains are connected and why a stroke would fail.
- Each stroke costs a little stamina. The strainer does not have to be perfect: it works with tar around its tip and up to half a metre above the surface.
- Every stroke pulls 6 m³ of tar (strongest at the strainer, fading out over 4 m); the rest of the pit flows towards the hole faster while you pump.
- A drained pit slowly seeps back (60 minutes by default).
- See-through hoses show the tar moving through them; the stream, splashes and a short puddle appear where it comes out, with sounds. Everyone near the pump sees and hears it.
- Multiplayer: one player at a time on a pump, everyone else sees the lever and the pumping animation.
Config
BepInEx/config/com.kydldev.DrainTarPit.cfg (changes are picked up while the game runs):
| Section | Settings |
|---|---|
| General | EnableAll - switch the mod off while playing (built pieces stay) |
| DebugLog | Enable - detailed log lines for bug reports |
| Building | TiltKey, RollKey, TiltResetKey, TiltStep |
| Effects | SoundEffects (all sounds of the mod), EffectsVolume, ScratchSounds, TarSplashSound, TarSlugFlow (tar visible in see-through hoses), LiquidFlowSpeed, NozzleFlowAmount, NozzlePuddle, NozzlePressure, NozzleFlowSeconds, PourSoundOffset |
| Drain | VolumePerStroke (5 - 30 m³), DrainRadius, StrainerSearchRadius, StrainerReach, MinTarDepth, MaxChainPieces, SnapTolerance, RefillMinutes (10 - 120) |
| Pump | AutoReach - step the player towards the lever so both hands reach the handle |
| Build Time Hose Visuals | Build Hose Style (Solid / Transparent) and Build Hose Opacity: the look a hose gets when you build it |
| World Hose Visuals | World Hose Style (Default / Transparent / Solid) and World Hose Opacity: how every hose already in the world is shown |
Requirements
BepInEx and Jotunn. Everyone on the server needs the mod. English and German; other languages show English.
Known limits
- The pour at the nozzle (stream, splashes, puddle) is shown to every player who has the pump loaded, but only while someone is pumping.
CHANGELOG
Changelog
1.0.0 - Initial release
- Hand pump, intake strainer hose, outlet nozzle hose, 1 m / 2 m hoses and a hose elbow (Hammer > KY-Items).
- Pump tar out of tar pits: single strokes or hold E to keep pumping, with full pumping animation (hands on the lever, the body bends with the stroke) seen by every player.
- Only the liquid is removed; items in the pit stay. Drained pits seep back over time.
- The tar travels visibly through see-through hoses and pours out of the nozzle with a stream, splashes, a puddle and sounds.
- Pieces can be tilted and rolled while building.
- Hose look per hose (solid / see-through) plus a world-wide override.
[General] EnableAllswitches the mod off while playing.- English and German.
- Works with the add-on WaterAndTarPools (pools for the pumped tar, water pumping, water styles, pool signs).
