TerramizerServer

TerramizerServer 0.5.1 is a lightweight, compatibility-focused performance companion for Valheim dedicated servers.

It disables Unity's development-only job debugger in batch mode without changing game simulation. ZDO synchronization, world-object handling, active areas, ownership, structural support, terrain, sleep, and world saves remain under Valheim's control.

Version 0.5.1

• Simplifies the server companion to a non-invasive Unity runtime optimization.
• Restores vanilla networking, object handling, ownership, simulation, sleep, and save behavior.
• Removes obsolete streaming, world-object, ownership, sleep, and diagnostics settings from the existing config automatically.
• Accepts vanilla clients, Terramizer clients, or a mixture of both.
• Requires no custom protocol, handshake, client mod, synchronized settings, or matching client version.

Install this package on the dedicated server only. The config file is:

BepInEx/config/r4v9n1.terramizerserver.cfg

You do not need to delete the config when updating.

Created and maintained by R4V9N1.

Changelog

1.0.2

• Ported TerramizerServer to the current Valheim 1.0 dedicated-server API.
• Replaced the obsolete Vector2i zone model with Valheim 1.0 Vector2s.
• Replaced the removed ZoneSystem.m_activeArea / m_activeDistantArea model with SimulationDistance.
• Updated ZDOMan.FindSectorObjects for the current Valheim 1.0 signature.
• Updated ownership handoff logic for Valheim 1.0 world-position active-area checks.
• Updated ownership checks to use ZDOMan.IsInPeerActiveArea.
• Fixed the Valheim 1.0 sleep-save compatibility patch while preserving normal autosaves.
• Dedicated-server compatibility is now validated against the actual Linux server assembly_valheim.dll.
• Clean configuration required: delete BepInEx/config/r4v9n1.terramizerserver.cfg before starting this version.
• The previous TerramizerServer release contained Valheim 1.0 compatibility bugs and should not be used.

1.0.1

• Updated Game.SleepStop compatibility for the current Valheim 1.0 player-profile save API.
• Leaves Valheim's own player-profile save completely untouched instead of depending on a specific SavePlayerProfile overload.
• Continues to skip only the extra sleep-triggered world save while preserving the normal autosave timer.
• Rebuilt and repackaged against the current Valheim 1.0 dedicated-server assemblies.

1.0.0

• Rebuilt against the current Valheim 1.0 dedicated-server assemblies.
• Preserves bounded zone-entry prefetch, static-piece ownership, terrain handshake, fast sleep, and no extra sleep-triggered world save behavior.

0.6.9

• Restores bounded server-side zone-entry ZDO prefetch for ready peers, prioritizing already-existing nearby objects so area and dungeon contents arrive sooner without creating peer zones or instantiating server-side scenes.

• Enables Unity collision-callback reuse by default to reduce physics-heavy dedicated-server GC without changing simulation frequency; the setting is opt-out for compatibility.

• Adds allocation-free BinarySearchDictionary.SetValue handling for hot value-type update paths, reducing avoidable server GC work without changing simulation or network authority.

• Caches the active ZDO integer table during VisEquipment updates, reducing repeated server lookup work without changing equipment synchronization.

• Prefilters event-driven ownership probes by cached prefab eligibility, avoiding unnecessary component-tree walks for non-structure ZDO views during zone loading.

• Writes nested ZPackage data directly from its existing buffer, reducing dedicated-server serialization allocations while preserving the exact length-prefixed wire format.

• Optimizes the periodic ZDO ownership handoff scan without changing active-area or ownership decisions; unexpected internal failures fall back to vanilla behavior.

• Extend the final TerrainComp.ApplyToHeightmap ±8 m clamp so dedicated-server terrain changes consistently honor the configured 16 m raise and dig limits.

• Adds additive terrain capability metadata and a versioned six-field companion response while preserving the legacy three-field RPC for older clients.

• Advertises unchanged server-synced companion metadata once per live ZNet instance instead of rewriting it on a timer, reducing needless dedicated-server update work while preserving late-joining client compatibility.

• Makes normal static-piece ownership event-driven; the legacy whole-world ZDO audit is disabled by default to protect dedicated-server frame time and network responsiveness.

• Disables the periodic ownership-summary loop while the optional broad audit is disabled, removing needless normal-operation log work.

• Prevents normal operation from loading or maintaining the ownership cache unless the audit is explicitly enabled.

• Preserves dedicated-server fast sleep and the no-sleep-world-save policy.

• Restores the terrain compatibility patch with 16 m raise and dig limits.

• Applies the 16 m limit to both negative and positive terrain clamp operands, including direct TerrainComp.RaiseTerrain digging.

• Removes retired server streaming and ownership-repair settings on load while preserving the new bounded streaming controls.

0.6.8

• Adds observed client/server test notes to the Thunderstore details, including freshly discovered dungeon load timings around 1.5-3.0 ms during the measured test pass.
• Documents that the server remained in ownership maintenance mode without TerramizerServer exceptions while dungeon discovery was tested.
• No runtime behavior changes intended relative to 0.6.7.

0.6.7

• Moves the human/AI development disclosure to the top of the Thunderstore details text so it is visible immediately.
• Documents AI-assisted code analysis and verification while retaining project-directed implementation and release decisions.
• No runtime behavior changes intended relative to 0.6.6.

0.6.6

• Adds a two-stage broad ZDO scanner: fast warm-up until the first full pass completes, then lower-cost maintenance scanning.
• Persists completed broad-scan pass count in the ownership cache so restarts can return to maintenance mode after warm-start when appropriate.
• Adds maintenance scan config for interval, claim limit, and ZDO records per pass.
• Extends compact ownership summaries with scan mode, pass count, interval, record budget, and claim limit.

0.6.5

• Adds an explicit Terramizer companion RPC response so clients can detect the server companion reliably.
• Keeps server-synced player-data metadata as a fallback for older Terramizer clients.
• Stops re-logging broad ZDO scan resume messages during normal in-session scanner progress.
• Changes watched per-object claim logging to off by default; the 30-second ownership summary remains the main view.
• Adds companion RPC reply counts to the compact ownership summary.

0.6.4

• Refreshes TerramizerServer companion metadata every 10 seconds instead of advertising only once.
• Persists broad ZDO scan progress in the ownership cache with scan index, object count, and timestamp metadata.
• Resumes the broad eligibility scanner from the cached scan index after restart when the cache is fresh.
• Adds the current zdoScanIndex to compact ownership summaries for restart verification.

0.6.3

• Advertises TerramizerServer version, static-ownership state, and ownership-cache state through Valheim server-synced player data.
• Allows Terramizer clients to auto-detect the server companion and enable their companion smoothing profile without a custom RPC or required handshake.

0.6.2

• Added an ownership cache stored as r4v9n1.terramizerserver.ownership-cache.tsv beside the BepInEx config.
• Records known eligible claimed ZDO ids with prefab hash, creator id, prefab name, and timestamp.
• On restart, warm-starts by direct cached ZDOID lookup and applies the new server session id to remembered pieces.
• Adds cache age, cache records per pass, and max restores per pass config.
• Extends the 30-second summary with cache restored, cache checked, cache entries, and cache removed counters.

0.6.1

• Changed claim logging defaults so every claimed piece is no longer logged on established worlds.
• Added watched-claim logging for sensitive interactive prefabs such as beds, chests, portals, fires, stations, signs, item stands, wards, doors, and gates.
• Changed the periodic dev summary to a compact 30-second view with interval claims, total claims, watched claims, skipped count, checked ZDO count, and attempts.

0.6.0

• Added an experimental static-piece server-ownership module for fresh-world dedicated server testing.
• Enabled the experiment by default and disabled dry-run mode by default for this test build.
• Preserves Valheim's player creator field while changing ZDO network ownership to the server for eligible loaded pieces.
• Limits claims to persistent, player-created pieces with WearNTear.
• Skips dynamic/physics-heavy objects such as ships, carts, dropped items, creatures, and floating objects.
• Added development claim logs and compact periodic ownership summaries.
• Added direct ZDO database scanning for dedicated-server testing when server-side Piece components are not instantiated.
• Keeps WearNTear, terrain, world saves, object creation/removal, and active-area handling intact.

0.5.1

• Simplified the dedicated-server companion to a non-invasive Unity runtime optimization.
• Disabled Unity's development-only job debugger in batch mode without changing simulation behavior.
• Restored vanilla ZDO synchronization, object handling, active-area checks, ownership, structural support, terrain, sleep, and world-save behavior.
• Removed Harmony and Valheim game-assembly references from the server build.
• Automatically removes obsolete networking, streaming, world-object, ownership, sleep, and diagnostics config entries; the config does not need to be deleted.
• Retained compatibility with vanilla clients and Terramizer clients without a handshake or matching version.