baggers-Ship_Comms icon

Ship Comms

Purchasable ship intercom, receive-only radio, and auxiliary power. Nearby voice/sound pickup, apparatus interference, configurable prices and audio, movable furniture, and Eyeless Dog hearing support.

By baggers

CHANGELOG

Changelog

1.1.8

  • Fix DawnLib 0.9.27 throwing during saves after purchasing passive auxiliary power. Skip its model lookup for this upgrade while retaining ownership serialization and keeping auxiliary power free of models or storage entries. DawnLib remains optional.
  • Clear inherited prefab-only flags on purchased intercom and receiver instances so normal furniture searches can discover them.
  • Verified purchases, startup gating, furniture/speaker movement, auxiliary protection, Eyeless Dog hearing, and receiver control across two real LAN peers in sockpoopdev.

1.1.7

  • Rebalance new-config defaults: Ship Intercom 400, Radio Receiver 100, Auxiliary Power Unit 200. The complete setup remains 700 credits; the strongest upgrade accounts for most of the cost. Existing saved config values remain configurable and are not silently migrated.
  • Restore local prices in LethalLib and terminal nodes after leaving another host's lobby, including after the ship scene unloads. Skip repeated terminal scans when incoming state snapshots do not change prices.
  • Restore shared voice sources when playback is disabled, replaced, or recycled. Reset spatial settings, voice gain, filter states, effect bypass, and occlusion overrides so PA/radio processing cannot carry over to another stream.
  • Tolerate a missing interaction action and a failed optional LethalConfig menu without blocking the main plugin.
  • Add regression coverage for lobby price changes and shared voice cleanup. No in-game test was performed for this update.

1.1.6

  • Play static only during received speech, including after apparatus removal. An idle receiver, a silently held intercom, and environmental audio alone no longer trigger hiss. Check voice activity each frame, excluding the listener's own microphone and locally muted players.
  • Restrict intercom static to living facility listeners. Remove the intercom's artificial ship-side enemy-noise source. Receiver audio stays at its movable speaker; actual voice and environmental broadcasts still alert enemies where heard.
  • After apparatus removal without auxiliary power, reduce voices to roughly half volume and add irregular short cutouts alongside the stronger processing. Use the network clock for consistent dropout timing and short fades to avoid hard digital clicks.
  • Buying auxiliary power immediately restores normal voice levels and uninterrupted reception. Preserve a powered personal walkie's independent reception when it supplies the stronger voice route.
  • Preserve passive auxiliary power purchases, configurable prices and volumes, enlarged intercom/receiver models, and the 1.2-second startup cue with yellow/green transmission gating.
  • Build with zero warnings and errors; pass 104 production-rule and audio checks, including speech-only static routing, facility boundaries, startup gating, dropout limits, and power recovery. No in-game testing.

1.1.5

  • Make Auxiliary Power Unit a passive terminal purchase with no model, collider, furniture, indicator, or sound. Purchasing it immediately protects all Ship Comms channels from apparatus interference; its configurable price stays at 300 credits by default.
  • Read the host's saved upgrade ownership instead of requiring a spawned cabinet. Preserve the existing name and catalog order so earlier purchases carry over, including stored units. Clear obsolete storage and placement flags after loading.
  • Keep the usual purchase resets, including challenge mode's reset of bought upgrades. Synchronize protection through the existing host state message, including for late joiners.
  • Keep the intercom and receiver 20% larger and preserve their audio, controls, startup timing, and saved configuration.
  • Build with zero warnings and errors; pass the existing 92 production-rule and audio checks. Review purchase, save/load, and reset paths against the installed game. No in-game testing.

1.1.4

  • Enlarge the intercom, radio receiver, and auxiliary power unit uniformly by 20%.
  • Scale buttons, nameplates, indicator lights, microphone pickup position, and speaker emitters with the models.
  • Enlarge furniture placement bounds and floor offset, keeping collider transforms at unit scale for the game's placement collision checks. Existing moved furniture from older versions can be re-placed with B to adjust its saved center height.
  • Preserve the 1.2-second startup tone, yellow-to-green transition, voice gate, and saved config values.
  • Build with zero warnings and errors; pass the existing 92 production-rule and audio checks. No in-game testing.

1.1.3

  • Use the selected 1.2-second PA announcement recording for intercom startup, audible only inside the facility.
  • Show yellow during startup and green only when the tone has finished and voice transmission opens. Block operator voice, nearby voice, environmental pickup, and carrier static during startup.
  • Synchronize a unique press sequence and ready time through the host. Wait for complete local playback as well, so delayed state updates cannot overlap the cue with intercom speech.
  • Cancel startup on release, invalid use, or lost heartbeat. Fresh presses replay the cue; heartbeats and unrelated state snapshots do not. Late snapshots of an already live broadcast do not replay its old tone.
  • Preserve saved config values. The host can skip the tone and delay for subsequent presses; local volume changes do not bypass the delay.
  • Use a new state-message format: all players must update to 1.1.3.
  • Include recording provenance and separate rights information in THIRD-PARTY-NOTICES.txt.
  • Build with zero warnings and errors; pass 92 automated production-rule and audio checks. No in-game testing.

1.1.2

  • Use a short classic radio chirp with a faint squelch tail for the intercom startup. The cue lasts 200 ms and plays only inside the facility.
  • Preserve the existing enable/volume controls and receiver positioning changes.
  • Pass 73 automated production-rule and audio checks; build with no warnings or errors. No in-game testing.

1.1.1

  • Replace the intercom startup chime with a short old-PA relay click, crackly squelch, and faint amplifier hum.
  • Play the startup cue only to living facility listeners; stop its tail if a listener leaves the facility. Its enemy noise is also restricted to the facility.
  • Keep the existing startup-sound enable/volume settings and preserve all saved configuration values.
  • Spatialize receiver voices at the model's live speaker position. Mount its environmental audio, one-shots, and static at the same point so they follow furniture movement and saved positions.
  • Restore the original voice position and distance settings when the receiver route ends; retain the personal-walkie path when a powered walkie supplies stronger reception.
  • Pass 73 automated production-rule and audio checks and build with no warnings or errors. Export the production sound as a WAV preview without launching the game.

1.1.0

  • Make body labels smaller, static, and a single line: SHIP INTERCOM and RADIO RECEIVER. Lower them and move them clear of the cabinet surface; remove the extra instruction/status lines.
  • Align the microphone grille with the slanted microphone head.
  • Fix furniture selection for both upgrades and centre the placement collider so moving, rotating, storing, and saving use the game's normal furniture system without lifting the cabinet off the floor.
  • Add an original 300 ms PA chime at the beginning of an intercom transmission, audible near the microphone and to facility listeners. Include the cue in enemy hearing.
  • Fix competing receiver/walkie voice routing when a powered radio is carried or made audible by Always Hear Active Walkies. Keep a single voice stream and preserve the louder receive path.
  • Add live intercom and receiver volume sliders through optional LethalConfig integration, while preserving individual player volume/mute controls. Add a host-synchronized start-chime switch and separate local chime-volume slider.
  • Add distinct PA and radio filtering with mild distortion, adjustable independently and restored when normal proximity voice resumes.
  • Let the held intercom pick up nearby players and world sounds within a host-configurable radius, defaulting to 4 metres. Exclude communication output to prevent feedback, provide a separate world-sound volume slider, and include transmitted sounds in enemy hearing.
  • Add faint transmission static and strong apparatus interference, synchronized by the host. Heavy static persists on enabled channels between calls, respects OFF/release controls, and resets when returning to orbit. Provide separate static volume sliders and a host option to disable the apparatus effect.
  • Add a silent, movable Auxiliary Power Unit for 300 credits by default, with a configurable price. Deploying it protects both communication channels even after apparatus removal; storing it removes protection.
  • Pass 70 automated production-rule and generated-audio checks; build against the installed v81 assemblies with no warnings or errors. This update has not been tested in-game.

1.0.0

  • Add two separately purchasable, movable ship upgrades: Ship Intercom and Radio Receiver.
  • Hold the intercom button to broadcast to everyone inside the facility without requiring walkies at the receiving end.
  • Add a receive-only ship speaker for active walkie transmissions, with a shared on/off button and power indicator.
  • Start the receiver switched off; stop its playback and enemy noise when switched off.
  • Use the game's audible-noise system for Eyeless Dogs and other noise listeners, including normal closed-ship attenuation.
  • Add host-configurable prices, synchronized to clients, and separate local listening volume settings.
  • Validate button requests on the host; end microphone broadcasts on release, lost heartbeat, death, disconnect, storage, or leaving range.
  • Build successfully against the installed v81 game, BepInEx, Harmony, Dissonance, Netcode, and LethalLib assemblies.
  • Pass 30 automated production-rule checks. Live voice playback, multiplayer operation, visuals, purchases, and actual enemy reactions have not been verified in-game.