Realistic Headphones Mod
AirPods, wired earbuds (in-ear and hanging) and headphones, beanie fitted as well as caps , that react when you bail or slam, They fall out, bounce and settle, and you skate or walk over them to put them back on.
| Date uploaded | 2 weeks ago |
| Version | 1.2.2 |
| Download link | GoodbarEnterprises-Realistic_Headphones_Mod-1.2.2.zip |
| Downloads | 812 |
| Dependency string | GoodbarEnterprises-Realistic_Headphones_Mod-1.2.2 |
README
Realistic Headphones Mod
Audio gear for your skater that reacts when you bail. Everything is in one install: the cosmetics and the plugin that moves them. headphones go to your neck on light bails and fly off on harder ones, earbuds fly off on bails and slams, airpods react the same.
What's new in 1.2.2
- AirPods sit snug in your ear. They no longer clip into the ear. They sit a little higher, with the stem angled down along the earlobe like the real thing. All colors.
What's new in 1.2.1
- A smaller pop-up. When your item desyncs in a session, a small card shows at the top of the screen instead of a big box. Press F9 for "How do I fix it?" and F10 for "Later". It closes by itself after a while.
- The pop-up buttons work. "How do I fix it?" shows the steps, and "Later" stops the reminders.
- The mod never moves your skater by itself. When an item gets stuck, it only sends the item to ReSkate again. Type
airpods fixin the console if you want the quick reload.
What's new in 1.2.0
- Dropped gear is drawn as real 3D models. Loose AirPods and headphones now look like the real thing, with shading and a shadow under them, instead of flat shapes.
- They lie on slopes. Gear that lands on a ramp or bank rests along it.
- No more floating. If something under your gear moves away (your board, your body, another skater), it falls again and lands properly. AirPods settle on their side, touching the ground.
- Headphones don't go through walls. The cups and band now bump off walls, ledges and ramps.
- Everyone sees it land in the same spot. Friends with the mod see your gear settle exactly where yours did.
What's included
- AirPods: pop out of your ears on a hard bail, bounce and slide on whatever is under them, then settle. Skate over one to put it back in.
- Wired earbuds (in-ear): in several colors, with the cord run by the plugin.
- Wired earbuds (hanging): the cord hangs down the side of your leg and swings while you skate. Available in white and other colors.
- Headphones: sit on your head (or over a beanie), get knocked down round your neck, or fly off.
Friends who have the mod see your gear fall too.
Install
Install with the ReSkate launcher, or drag the zip onto it. Allow the plugin when the game asks.
If you have the older separate mods installed (AirPods, AirPods & Wired Earbuds, Headphones, Wired Earbuds Hanging), remove them. This package already contains all of them.
All you need is the plugin
Once the plugin is enabled, it works on its own. You don't need to equip anything from the Outfit tab: the plugin puts the gear on your skater for you and swaps it when you change style or color. Your normal outfit stays as it is. IF you disre to just wear the cosmetics and not use the plug in as intended you can , for example just want to use the headhones over the beanie, just go into console type airpods off and you are free to equip the cosmetic of your choice. this would stop the slam / bail physics. just remember when you want to turn it back on unequip any item in your outfit slot then type in console airpods on and you are good to go.
Controls
| Key | What it does |
|---|---|
| P | Switches style, in this order: AirPods, wired earbuds, headphones on your head, headphones round your neck, then back to AirPods. You keep your color if the next style comes in it; otherwise you get white. |
| O | Changes the color of the style you're wearing. Colors that aren't installed are skipped. |
| I | Headphones only: moves them between your head and your neck. If they've been knocked off, puts them straight back on. |
The keys only work while the game window is active and chat or a text box isn't open. Your style and color are remembered next time you play.
Why the plugin asks for permissions
- outfit / skater / physics / world: lets it see what you are wearing and drop or put back the item.
- net.session: lets friends with the mod see your gear fall.
- ui.screen / throwdowns: shows the pop-up when the game stops showing your item in multiplayer. Your answer to that pop-up comes back through the throwdown events.
- storage: remembers your settings and the item you last wore, so it comes back after a respawn or level load.
If your item disappears in multiplayer
Sometimes your item gets stuck in a session after a respawn, a fast travel or going back to a session marker. A small card at the top of the screen tells you. The fix is to go back to San Van: press F9 to see the steps, or F10 (Later) to hide the card and stop the reminders.
Console (~)
airpods: statusairpods drop: knock them outairpods reset: put them backairpods color: switch colorairpods set chance 1: always fall outairpods off/airpods on: take the gear off and stop the bail physics, or turn it back on
Credits
Models and plugin by GoodbarEnterprises, made for ReSkate. Not affiliated with Apple. Shout out to Fourth for helping with some debugging and coding dudes a wizard of skate
CHANGELOG
Changelog
1.2.15 - gear stays on through session marker returns
- Going back to a session marker (or any reset or respawn) no longer takes your gear off and puts it back on when ReSkate has kept it on the new skater. Practising from a marker used to do that every few seconds, and that is what made ReSkate lose your gear and show "Gear connection delayed".
- When ReSkate did drop your gear at a respawn, the plugin now sends it once and gives ReSkate time to put it on, instead of taking it off again every 2 seconds while ReSkate was still putting it back.
- Fixed: after some respawns ReSkate put your gear in a hidden slot, so it stayed stuck on the old item and nothing you picked with P showed. The plugin now spots that within a few seconds, takes the gear off for about 5 seconds so ReSkate lets go of the old item, then puts it back on: the same thing turning the plugin off and on does.
- If your gear does go missing, the pop-up now tells you how to bring it back without leaving the session: press P to switch styles, then turn the plugin off and on again (Insert, PLUGINS). Then press P to go back to the style you want.
- No more instructions to leave the session and load San Van.
1.2.14 - wired cords no longer stretch from far away
- Seen from far away, the wired earbuds' cord stretched out from the skater and only looked right up close. The game turns off the cord's swing at a distance, and the cord's far-away models still hung from it. Those models now follow the body, the way the game's own clothing does, so the cord stays with the skater at any distance.
- Up close nothing changes: the cord looks and swings exactly as before.
- Covers the hanging and the in-ear wired earbuds in every color.
1.2.13 - dropped gear is a real object again, without the black screen
- Dropped headphones and earbuds are real world objects again. The objects now load a few seconds after you are in the map, instead of with every map, so maps load normally. On maps that waited one to four minutes before, loads now take a few seconds.
- Until the objects are in, or if they cannot load, dropped gear is drawn by the plugin as in 1.2.12, hidden behind walls, players and your own skater.
- The plugin now asks to draw and play effects. ReSkate's effects loader is what loads the dropped objects after the map; the mod plays no particle effects and nothing from the store.
1.2.12 - dropped gear is drawn again, and no more black screen
- The black screen of one to four minutes after loading some custom maps came from the dropped gear's world objects. 1.2.11 did not fix it. The objects are out of this version and dropped gear is drawn by the plugin again, so maps load normally.
- Drawn gear is now hidden behind walls, ramps, other players and your own skater, instead of showing through them.
- Picked-up headphones stay in your hand on the way to your head.
- The plugin now asks to read other players' skaters, to know when one is standing in front of dropped gear.
1.2.11 - black screen after loading some custom maps fixed
- Fixed a black screen that lasted one to four minutes after loading some custom maps, such as Gravesend Skatepark and Hoodlum Training Facility. The dropped objects' textures were too small for the game to count as loaded; they are now a normal size.
- The dropped headphones and earbuds look the same as before.
1.2.10 - dropped-object files cleaned up
- The dropped-object data now lists only this mod's own files. Entries that belonged to other mods and to the game were removed.
- Every object model the package lists is now included.
- The package now tells ReSkate to keep the dropped objects loaded on custom maps.
- The plugin now waits for a map to finish loading before it puts your gear on. This shortens a long wait after loading on some custom maps. Your gear appears a moment after you spawn.
- No changes to gear, physics, colors, drops, pickups, settings, achievements or multiplayer sync.
1.2.9 - the object stays in the hand
- Picking gear up no longer swaps the world object for the drawn model: the same object rides in the hand until it is back on.
- Picked-up headphones no longer vanish when the skater stands up: they stay in the hand all the way to the head.
- AirPods picked up while skating past go to the hand and ride up to the ear, instead of vanishing off the ground.
1.2.8 - dropped gear as real world objects
- Dropped headphones and earbuds are now real objects in the world, in all four colors, on every map. They are lit and shadowed by the game like anything else on the ground.
- The objects are built from the worn SLAM AUDIO models, logo included.
- If the objects are not available, the drawn models are used as before.
airpods prop drawswitches to the drawn models by hand andairpods prop autoswitches back. - Drops, pickups and multiplayer sync are unchanged, and players on 1.2.7 still see the drawn models.
1.2.7 - multiplayer cleanup and recovery fixes
- Clear friends' dropped-item displays when the owner picks up the gear, returns it automatically, resets it, removes it manually or unloads the map or plugin.
- Retry return notifications every two seconds while the plugin is active so missed messages can clear stale models and labels. Keep gear that is still on the ground active.
- Remove remote dropped gear when its owner leaves or the local player exits the session.
- Reduce false desync warnings during respawn and planned gear reloads. Wait for recovery to settle and require repeated missing-state readings before warning.
- Discard invalid outfit readings and old observations from menu or loading pauses. Clear recovered warning cards without telling players already in a session to rejoin.
- Update recovery wording: gear can recover automatically; try
airpods fixbefore leaving for San Van. - Add a prominent setup notice: unequip manually selected SLAM gear and enable Realistic Headphones in the plugin menu. The plugin equips the selected gear.
- Retain the current live headphone, AirPods and wired earbud models, textures, artwork, sounds, settings and earned achievements.
1.2.6 - fitted earbuds and achievement update
- Include the stable White wireless and wired earbud fit in the main package. A separate ear-fit asset pack is no longer required.
- Correct the White wireless earbud appearance so the SLAM AUDIO logo is readable.
- Add Steezy Listening for landing a trick while the automatic neck-to-head headphone lift overlaps the trick. Manually pressing I does not qualify.
- Add updated achievement pictures and the View Achievements picture panel.
- Use the shared level-up achievement sound at lower volume, and keep unlock cards visible for 7.5 seconds.
- Let settled dropped gear become eligible for pickup without first walking away and returning.
- Improve the smoothness and close-up detail of drawn dropped headphones.
- Remove the earbud preview camera and its menu option. No fit selection is needed.
- Preserve the existing headphone models, other color appearances, wired remote and cord physics, settings and earned achievements.
The lower cord's baggy-pants contact experiment and native-object drop prototype are not part of this release.
1.2.5 - SLAM AUDIO update
Gear and artwork
- Replace the old gear designs with the matching SLAM AUDIO headphones, wireless buds and wired earbuds in White, Red, Blue and Black.
- Include regular, beanie and neck headphone variants, textured black padding, inset black logo panels, black steel hardware and small rear earcup controls with a subtle green power indicator.
- Add matching wired cords and a modeled three-button remote, splitter and plug.
- Lower the beanie headbands, improve neck clearance and correct panel seams and logos across all headphone colors, including White beanie and White neck.
- Include matching menu thumbnails and gear cards, plus a new Thunderstore icon retaining the Realistic Headphones Mod title and falling-AirPods motif.
Plugin
- Keep head-to-neck and neck-to-head changes free of gear-change notifications.
- Correct the neck-to-head timer so it does not interrupt ground pickup.
- Include the current session statistics and hidden achievement system. Preserve earned unlocks and saved settings.
- Remove the nonworking AirPods fit menu, sliders, preview, console command and temporary fitting controls. Existing model placement is retained; old saved fit values are ignored.
1.2.4
- Add Insert-menu settings, gear and color selection, sensitivity and pickup controls, cord settings and Help.
- Show gear-change cards and improve session-load handling and outfit-slot recovery.
- The AirPods fitting option from this release is removed in 1.2.5.
1.2.3
- Add bend-down pickup, improve dropped-bud ground handling and refine wired gear and cord placement.
1.2.1
- Use a smaller multiplayer recovery card with working F9 and F10 actions.
1.2.0
- Improve the shaded dropped-gear display, slope alignment, settling, headphone collision and shared landing positions.