Please disclose if any significant portion of your mod was created using AI tools by adding the 'AI Generated' category. Failing to do so may result in the mod being removed from Thunderstore.
StationSupply
Updated 4 days agoFeeds production stations from nearby public chests using real resources. Each intake selects its own nearest eligible chest. Collect the finished products normally.

Using StationSupply
Place a public stationary chest on the same floor just outside the loading hatch. Default reach is two metres horizontally from the intake, with 1.5 metres of height tolerance relative to the station base. Fuel and material intakes can use separate chests. If the selected chest is empty, open or missing the correct item, feeding waits.
Server settings
Edit [StationSupply] in the active server's heimkit.cfg. Restart the server to apply changes. Set Enabled = false to turn off this feature. The eight production families are enabled by default. Set Fermenters = true or Obliterators = true to opt in. ObliteratorCategories controls which items are transferred. The default MaxItemsPerVisit is 10, with a one-item limit for fermenters.
Chest placement by station
Smelter
Ore or scrap on the left and coal on the right when facing the output.

Blast Furnace
Both intakes are on your left when facing the output. Place a chest beside each slot.

Eitr Refinery
Place the soft-tissue chest on the floor to the left or front-left and the sap chest beside the funnel just right of front center.

Charcoal Kiln
Place one wood chest just to either side of the opening.

Windmill
Place barley by the loading box opposite the flour outlet.

Spinning Wheel
Place flax beside the hopper.

Frigid Kiln
Place ice beside the loading prompt opposite the output.

Shield Generator
Place shield fuel beside the loading prompt at the base.

Fermenter
Optional. Place mead base beside the sheltered barrel and leave the tap accessible.

Obliterator
Optional. Place a dedicated disposal chest by the loading opening and leave the lever accessible. Pull the lever manually.
