zee-UniversalCartAttachments icon

UniversalCartAttachments

Cart hitches and chains, a Cart Stacker, a Belt Connector tow harness, and the CartCam Kit: mountable cameras, dashcams, a wearable BodyCam, tablets with live audio and a silent spawn-van security monitor.

By zee
Last updated 2 hours ago
Total downloads 23
Total rating 1 
Categories Tools Items Client-side Server-side Quality Of Life
Dependency string zee-UniversalCartAttachments-1.0.0
Dependants 0 other packages depend on this package

This mod requires the following mods to function

BepInEx-BepInExPack-5.4.2305 icon
BepInEx-BepInExPack

BepInEx pack for Mono Unity games. Preconfigured and ready to use.

Preferred version: 5.4.2305
Zehs-REPOLib-4.5.1 icon
Zehs-REPOLib

Library for adding content to R.E.P.O.

Preferred version: 4.5.1

README

Disclaimer: No AI-generated artwork, textures, or audio assets were used in this mod. All visuals are created using in-game resources and custom Unity geometry.

Universal Cart Attachments

Universal Cart Attachments expands R.E.P.O.'s cart and equipment systems: hitch carts and vehicles together into chains, stack one cart on another, tow carts from a belt harness, and watch the level through physical CartCams. Mount them on walls and vehicles, wear one as a BodyCam, and view them on tablets or on a security monitor installed in the spawn van.

Everyone in the lobby needs the mod installed, with the same version.


Cart hitches

Join carts and vehicles end to end with a trailer hitch.

  • Works with the Large C.A.R.T., Pocket C.A.R.T., Scout and Hauler.
  • Every supported vehicle has a front and a rear hitch point, so you can build chains of several carts and vehicles.
  • Pulling or pushing one part of a chain moves the hitched carts and vehicles with it.
  • Spacing between two hitched objects can be adjusted (Left Alt + scroll).
  • A hitch disconnects automatically if two objects are pulled too far apart.
  • The host decides every hitch, so all players see the same chain.

Cart Stacker

A shop item that lets you stack one cart on top of another.

  • Install it on a Large C.A.R.T. or Pocket C.A.R.T. by holding the Cart Stacker and pressing E while aiming at the cart.
  • Stack a cart by carrying another cart over it and letting go slowly. It snaps onto the stacker and is held in place.
  • Pull the red release lever (E) to set the upper cart back down.
  • Remove the stacker by holding H on its mounting plate. The item comes back. A cart can't be removed while another cart sits on top.
  • Fully networked: the host runs the stacking and everyone sees the same stack.
  • Shop price: $20,000–$35,000 base, with a 25% chance to appear. It stops appearing in the shop once the team owns two. The game's own shop discounts still apply, so a discounted Stacker can be cheaper.

Belt Connector

A shop item: a waist harness for towing carts and vehicles on a rope.

  • While holding the Belt Connector, aim at a cart or vehicle and press E to put the belt on and hook the rope to it.
  • Aim at your own rope or its clamp and press E to unhook.
  • Hold Left Alt + scroll while aiming at your rope to change its length.
  • While wearing it, hold E (not aiming at a cart) for one second to take the belt off.
  • Heavier loads slow you down more. The rope unhooks itself if it is stretched too far.
  • Shop price: $9,000–$18,000 base, with a 35% chance to appear.

CartCam Kit

A shop item containing one physical camera and one tablet that are linked as a kit.

  • Shop price: $25,000–$40,000 base, with a 25% chance to appear (at most one kit per shop visit).
  • Buy several kits for several cameras. Every switched-on camera is available on every tablet.
  • Each tablet chooses its camera independently, so two players can watch different cameras at the same time.

Camera mounting

  • Surfaces: hold a camera, aim at a wall, floor, ceiling or other solid surface and press E to mount it. A preview shows where it will go. Mounting switches it on.
  • Dashcams: aim at the front or back of a Large C.A.R.T., Pocket C.A.R.T., Scout or Hauler and press E to mount it as a front or rear dashcam. It rides with the vehicle.
  • Take down a mounted camera by aiming at it and pressing E. It is the same item, and its power stays as it was.
  • Handheld: a camera you are carrying keeps working, so you can film by hand.
  • Power: press F while holding a camera, or while wearing your own BodyCam, to switch it on or off.

Wearable BodyCam

  • Hold a camera and hold Left Alt for one second to tape it to your chest. Hold Left Alt for one second again to take it off. A ring shows the progress, and pressing another key or scrolling cancels it.
  • It sits high on the upper chest, held on with visible translucent tape.
  • It is fitted to each character's actual chest surface, including clothing and chest accessories. Arms, hats, eyewear and held items do not affect the fit.
  • Hands-free: your hands stay free while it films.
  • It follows your body when walking, crouching or jumping, and during ragdoll.
  • Other players see it on your chest and can watch its feed. It also shows up in other cameras' feeds.

Camera viewing and audio (tablets)

  • Hold a tablet and press E to open the camera feed. Scroll to switch between switched-on cameras, and press E to close.
  • The picture is a grainy black-and-white fisheye image with the camera's own lamp.
  • One-way audio: while you watch a switched-on camera on a tablet, you hear what that camera hears:
    • players' voices near the camera, live
    • environmental sounds near the camera (footsteps, machinery and so on)
    • all through a cheap-microphone effect (thin, compressed, slightly gritty)
    • walls between a sound and the camera muffle it
  • There is no talk-back. Nothing you say is sent to the camera's location through the tablet.
  • Privacy note: while someone watches a switched-on CartCam on a tablet, your speech near that camera can be heard by them, even if they are far away. Normal game rules still apply: if you mute yourself, nothing is transmitted. If you don't want to be heard, switch the camera off or keep away from it.

Spawn van security monitor

  • A rugged security monitor is installed automatically on the wall of the spawn van, beside the van's big screen. You don't need to buy anything.
  • It shows a switched-on CartCam automatically. If the camera shown is switched off or removed, it moves on to another one. With no camera on, it shows NO SIGNAL.
  • The host controls what it shows, for everyone: look at the monitor, press E to open the enlarged view, then scroll to switch cameras. Other players can open the enlarged view too, but can't switch.
  • Press E to close the enlarged view, or walk away or open a menu.
  • The van monitor is completely silent. No player voices and no environmental sound come from the physical monitor or from its enlarged view. Only tablets play camera audio.
  • Optional: the host can move the monitor by looking at a spot on the van wall and pressing Ctrl + Insert. Everyone sees the host's placement. Clear WallAnchor in the config to return to the default spot.

Bonus: Huntsman hanging heads

When a player is killed by a Huntsman indoors, their head is hung from the ceiling on a rope until a teammate grabs it. It only happens where there is a solid ceiling and room below. Otherwise the normal death happens as usual. It can be turned off in the config.


Installation

With Thunderstore Mod Manager or r2modman (recommended): install Universal Cart Attachments for R.E.P.O. The required mods are installed automatically:

Manual:

  1. Install BepInExPack and REPOLib for R.E.P.O.
  2. Put UniversalCartAttachments.dll in BepInEx/plugins/ (a subfolder such as BepInEx/plugins/UniversalCartAttachments/ is fine).
  3. Start the game once to create the config file BepInEx/config/Zee.UniversalCartHitch.cfg.

Keep only one copy of the DLL anywhere under BepInEx/plugins.

Multiplayer: every player needs the mod, with the same version. The BepInEx log prints a build id at startup (... v1.0.0 has loaded! Build id ...), and all players should show the same one.

Controls

Action Control
Select a cart or vehicle, then hitch it to another H on the first, H on the second (H again cancels the selection)
Unhitch H while aiming at a hitched object
Hitch spacing Left Alt + scroll while aiming at a hitched object
Install Cart Stacker Hold the Stacker, aim at a cart, E
Stack a cart Carry a cart over a cart with a Stacker and let go slowly
Unstack (release lever) E on the red lever
Remove Cart Stacker Hold H on the mounting plate
Put on Belt Connector and hook Hold the belt, aim at a cart or vehicle, E
Unhook belt rope E on your rope or clamp
Rope length Left Alt + scroll on your rope
Take off Belt Connector Hold E for 1 s (not aiming at a cart)
Mount CartCam on a surface / as a dashcam Hold a camera, aim, E
Take down a mounted CartCam E on the camera
Camera power F while holding it, or while wearing your BodyCam
Wear / take off BodyCam Hold Left Alt for 1 s (holding the camera to put it on)
Open / close tablet feed Hold a tablet, E
Switch tablet camera Scroll while the feed is open
Open / close van monitor enlarged view Look at the monitor (within about 3 m), E
Switch van monitor camera (host) Scroll in the enlarged view
Move van monitor (host, optional) Look at the van wall, Ctrl + Insert

E is the game's own Interact key, so it follows your rebinding. H, F, Left Alt and Insert can be changed in the config.

Configuration

Everything is in BepInEx/config/Zee.UniversalCartHitch.cfg, and the file is created on first launch. In multiplayer, the host's shop and pricing values are the ones that count. The most useful settings:

  • Shop items: [Cart Stacker], [Belt Connector] and [CartCam Kit] each have PriceMin / PriceMax (in thousands of dollars) and ShopChance (percent).
  • Hitches: [Hitch] holds the key, connect range and break distance. [Spacing] holds the modifier key, step size and maximum spacing. [Visuals.Mounting] has per-vehicle fine-tuning of the hitch points.
  • Belt Connector: rope length limits and step, pull stiffness, and slowdown per kg.
  • Camera picture ([CartCam]): resolution, viewer frame rate (ViewerFps, default 15), field of view, fisheye bulge, contrast, brightness, grain, vignette, lamp and draw distance.
  • Camera audio ([CartCam]): MonitorAudio / MonitorVoices (on or off), volumes, ranges, and the cheap-mic effect settings.
  • Controls ([CartCam]): CamPowerKey (default F) and BodyCamKey (default Left Alt).
  • BodyCam fitting ([CartCam]): BodyCamChestHeight (how high on the chest), BodyCamContact (how tightly the plate sits on the clothing), BodyCamHeight and BodyCamTilt.
  • Van monitor ([CartCam Van Monitor]):
    • Scale (default 1.75)
    • WallAnchor: a custom spot set with Ctrl + Insert. Leave it empty for the default spot.
    • OffsetRight / OffsetUp / OffsetOut: fine-tuning
    • Side: a backup search only
  • Huntsman heads: [Huntsman Head Hanging] can turn the feature off.
  • [Debug] DeveloperMode (default off): turns on testing keys (item spawners, test camera, diagnostics report, audio test). Leave it off for normal play.
  • [Debug] VerboseLogging (default off): writes detailed logs, which are useful when reporting a bug. With it off, only warnings, errors and the startup line are logged.

Compatibility and known limitations

  • Built and tested on R.E.P.O. v0.5.2 with BepInExPack 5.4.2305 and REPOLib 4.5.1. Other game versions have not been tested, and a game update may need a mod update.
  • All players need the mod with the same version. A player without it can't see or use the mod's items or hitches.
  • The BodyCam measures the wearer's outfit when it is put on. If you change outfit while wearing it, take it off and put it back on.
  • Upgrading from a pre-release test build: BepInEx keeps existing config values, so a config file from an early build may still have old shop prices. Delete those lines, or the file, to get the current defaults.