Beam Fit

Updated 5 minutes ago

Join our Discord: discord.gg/haSwxPa9GU to report bugs, request features or other mods, or give feedback.


← All mods in Building Tweaks

Beam Fit

Switch: F1 → 0 - Sub-mods → Beam Fit (on by default).

An Ashwood beam is thinner than a Grausten wall. A beam snapped into the wall (on its top edge, across it or diagonally through it) sits half inside the stone: it shows on one side only, in patches, or flickers where its face meets the wall's. Beam Fit makes the visible beam as thick as the wall it lies in (standing out 1 cm) and centres it there, so every beam shows evenly on both sides, like timber framing.

Features

  • Every beam whose middle lies inside such a wall, lying flat in it: straight beams, diagonals and poles.
  • Beams that snapped half out of the wall (cutting at least 2 cm into the stone) are pulled into its middle too.
  • Beams only lying against a wall's face, standing free or crossing it are left as they are; so are beams that already stand out of both sides. Only upright walls count: floors and roofs of the same stone do not, and a beam whose length goes through the wall (or standing on it) is never touched.
  • The beam's damaged looks (worn, broken) are fitted too.
  • Visual only: collision, snapping, support and the saved piece are unchanged; switched off, every beam is back as it was. Already built beams are fitted when they load.
  • Which beams and walls: parts of their names in the settings (Ashwood beams and poles in Grausten walls by default), so other combinations can be added.

Performance

One physics box test per beam when it, or a wall next to it, loads, is built or is removed.

Settings (F1)

In F1 these are under Beam Fit - ..., below the switches.

General

Setting Default What it does
Beams ashwood_beam,ashwood_wall_beam,ashwood_pole Pieces that are fitted into walls: parts of their names, separated by commas.
Walls grausten Walls the beams are fitted into: parts of their names, separated by commas.
Stick out (cm) 1 How far a fitted beam stands out of each side of the wall. (range 0 to 10)