Extra Snap Points

Updated an hour ago

Join our Discord: discord.gg/haSwxPa9GU to report bugs, request features or other mods, or give feedback.


← All mods in Building Tweaks

Extra Snap Points

Switch: F1 → 0 - Sub-mods → Extra Snap Points (on by default).

In the game chests, rugs, fermenters, chairs, benches, thrones and tables have no snap points: lining up a row of chests, laying rugs side by side, setting chairs around a table or putting a chest neatly on a floor tile is guesswork, and the game's manual snap keys (Q / E) do nothing while you place one. Extra Snap Points (called Chest Snapping before; your settings carry over) fixes that.

Features

  • Every chest gets snap points on the eight corners of its box, the middle of each bottom edge and the middle of its top and bottom.
  • A chest snaps flush next to, on top of or below another chest, like walls snap to walls; two chests of different sizes line up centred.
  • Floor tiles, by where you aim: the tile under the crosshair is split into 3 x 3 zones. Aim near one of its corners and the piece goes into that corner (lying over the tile from there); near the middle of an edge and it lies flush with that edge, centred along it (a wardrobe against the wall side of a tile); in the middle and it is centred on the tile (a fermenter). It never hangs over onto the next tile. A piece bigger than a tile (a large rug over several floor pieces) is centred instead: aim near a tile's edge and its middle goes onto that seam, aim at the tile's middle and it goes there, so a big rug sits exactly in the middle of a room of any width. Floors of any size, and other flat pieces. The floors themselves are not changed (but for the 4 x 4 floors' middle points): they snap to each other as before.
  • Q / E while placing pick a point of the piece you hold (the game shows its name in plain words: "Rug centre", "Rug front edge", "Rug front left corner"; a chest's say "(bottom)" or "(top)"); it then snaps onto the nearest corner, edge middle or middle of a tile, or of a chest. Again past the last one: back to automatic ("Auto"), which uses the aim zones.
  • Works for every chest: wood, reinforced, personal, black metal and Grausten chests, barrels, the wardrobe, and chests from other mods (anything with storage that has no snap points of its own).
  • Rugs (the game's and Nordic Rugs', not the wall versions) and fermenters too, with points on their corners, the middle of each edge and the middle: rugs lie flush side by side, fermenters stand side by side, and both snap onto floor tiles (e.g. a fermenter right in the middle of a tile). Each kind snaps to its own kind.
  • Furniture too: everything you can sit on (stools, chairs, benches, thrones, also other mods' seats; not ships or the hot tub), tables (not crafting tables like the workbench, the Galdr table or the cartography table) and beds (the simple bed, the dragon bed, the Ashwood bed, also other mods' beds), with points on the corners, the middle of each edge and the middle of their base, sized from their model. Furniture snaps to furniture: a chair or a bench stands flush against a table, two benches or beds in a row, and all of it onto floor tiles by the 3 x 3 zones (a bed wider than a tile goes with its middle onto the seam between two floor pieces or onto a tile's middle).
  • The hot tub too (its own switch): it has eight snap points of its own around its base, but they are 0.5 and 1.5 m out from its middle and never put it on the floor grid. It gets a point at its middle, which goes onto the floor grid by the 3 x 3 zone it is over: onto a corner where four floors meet, the middle of the seam between two floor pieces, or a tile's middle. Turned any way you like; turned along the floor, its stove lies on a seam. Its own eight points stay for Q / E.
  • Machines (their own switch): the smelter, the blast furnace, the charcoal kiln, the eitr refinery, the windmill, the spinning wheel, the Frost kiln (and other mods' machines that work like a smelter) and the Frost Foundry get points on their base too, sized from their solid parts (the windmill by its stone base, not its blade arms). They stand flush side by side (a row of smelters) and go onto floor tiles by the 3 x 3 zones; most are wider than a tile, so their middle goes onto the seam between two floor pieces or onto a tile's middle. The Frost Foundry keeps its own four corner points too. The oven needs nothing: its own points are its 2 x 2 m base, so it already fits a floor tile exactly.
  • Portals (their own switch): the wood and stone portals (and other mods' portals) get points on their base too, sized from their solid parts. They stand flush side by side and go onto floor tiles by the 3 x 3 zones. A portal is wider than a floor tile, so across it its middle goes onto the seam between two floor pieces (aim near the seam) or onto a tile's middle; front to back it lies flush with the tile's edge or centred on it.
  • Ballistas (their own switch) snap like the machines: points on their base (2.2 x 2.5 m, from their solid part, not the turning bow), flush side by side and onto floor tiles by the 3 x 3 zones; across, the middle goes onto the seam between two floor pieces or a tile's middle.
  • The 4 x 4 floors (Grausten and stone) as four 2 x 2 tiles: they get snap points in the middle of each edge and in the middle, on top and below. Other floors, walls and beams snap to them every 2 m (a 4 x 4 floor 2 m along another, a wall down the middle), and chests, rugs and furniture see four tiles with 3 x 3 zones each, 6 x 6 in all: aim at a quarter of the floor and the piece goes into that quarter's corner, against its edge or in its middle.
  • Hanging braziers (and other pieces that hang from a ceiling) snap under floor tiles by the same 3 x 3 zones: their chain goes onto the corner, the middle of an edge or the dead centre of the tile you aim at (on a 4 x 4 floor every metre). So a floor used as a roof holds a brazier exactly in its middle.
  • Sconces on standing beams: aim a sconce at a pole, a beam stood upright or a pillar and it goes flush against the side you aim at, centred on it and facing straight out, at a height in 25 cm steps from the beam's foot (so a row of sconces on several poles hangs at the same height). Elsewhere (walls) it is placed as the game does.
  • Standing lights: the lava lantern, the standing brazier, the blue standing brazier and the iron fire pit snap onto floor tiles by the 3 x 3 zones and stand flush side by side. The lantern and the braziers aimed at a beam go on top of it: centred on top of a standing beam or post, or on a lying beam (centred across it, flush with an end or in the middle, by where you aim).
  • Item stands: the standing one snaps like the lanterns (floor tiles, side by side, on top of beams). The wall one goes onto walls by where you aim: the wall is split into 3 x 3 zones like a floor tile, so it goes into a corner, flush with an edge and centred along it, or in the middle, facing out (a wall with snap points every 2 m counts as tiles). Aimed at a standing beam it goes on like a sconce.
  • The cartography table snaps like furniture: flush side by side, against tables and benches, onto floor tiles.

Details

  • By default each kind snaps to its own kind and to floor tiles only, and walls or floors never snap onto them, so a chest near a wall stays where you aim. Snap to other pieces lets them snap to any piece's snap points too.
  • The points are sized from each piece's real edges: the Grausten chest and the wardrobe from their models (their colliders are smaller), Nordic rugs from their woven area (not the see-through border of their picture, so the tassels hang over the line like a real rug's).
  • On a tile edge a piece reaches 2 cm past the line, so the floor's planks (which stick out about a centimetre) do not show as a thin line along it.
  • Chests, furniture and floors you already placed get the points too (no rebuilding needed). Switched off, or a kind switched off in the settings, they are gone again at once.

Notes

  • Client-side. The chests are normal chests: other players see them as usual, with or without the mod.

Settings (F1)

In F1 these are under Extra Snap Points - ..., below the switches.

Snapping

Setting Default What it does
Ballistas on The ballista snaps like the machines: flush side by side and onto floor tiles by the 3 x 3 zones (it is wider than a tile: across it, its middle goes onto the seam between two floor pieces or onto a tile's middle).
Snap to other pieces off Chests, rugs, fermenters and furniture also snap to the snap points of walls, beams and other pieces, and those to them. Off: each snaps to its own kind and to floor tiles only, so a chest near a wall stays where you aim.
Snap to floor tiles on Chests, rugs, fermenters and furniture snap onto floor tiles (and other flat pieces): flush with a tile's edge and centred along it, or right in the middle of the tile, so they do not hang over onto the next tile. The floors themselves snap as before.
Rugs on Rugs (the game's and Nordic Rugs', not the wall versions) get snap points too: flush side by side, and onto floor tiles.
Fermenters on Fermenters get snap points too: flush side by side, and onto floor tiles (in the middle of a tile).
Chairs benches and thrones on Everything you can sit on (stools, chairs, benches, thrones, also other mods' seats; not ships or the hot tub) gets snap points too: flush side by side and against tables, and onto floor tiles.
Tables on Tables (not crafting tables like the workbench or the cartography table) get snap points too: flush side by side and against chairs and benches, and onto floor tiles.
Beds on Beds (the simple bed, the dragon bed, the Ashwood bed, also other mods' beds) get snap points too: flush side by side and against other furniture, and onto floor tiles (a bed wider than a tile goes with its middle onto the seam between two floor pieces or onto a tile's middle).
Hot tub on The hot tub snaps onto floor tiles by its middle, at any turn: onto a corner where floors meet, the middle of the seam between two floor pieces, or a tile's middle, by the 3 x 3 zone its middle is over (turned along the floor, its stove then lies on a seam). Its own eight points around its base stay for Q / E.
Machines on Smelters, the blast furnace, charcoal kilns, the eitr refinery, the windmill, the spinning wheel, the Frost kiln and the Frost Foundry (also other mods' machines that work like a smelter) get snap points too: flush side by side and onto floor tiles by the 3 x 3 zones (one wider than a tile goes with its middle onto the seam between two floor pieces or onto a tile's middle). The oven needs nothing: its own points already fit a floor tile.
Portals on The wood and stone portals (also other mods' portals) get snap points on their base: flush side by side and onto floor tiles by the 3 x 3 zones. A portal is wider than a floor tile, so across it its middle goes onto the seam between two floor pieces (aim near the seam) or onto a tile's middle; front to back it lies flush with the tile's edge or centred on it.
4x4 floors as four 2x2 tiles on The 4 x 4 floors (Grausten and stone) get snap points in the middle of each edge and in the middle: other floors, walls and beams snap to them every 2 m, as if they were four 2 x 2 floors, and chests, rugs and furniture see four tiles of 3 x 3 zones on them (6 x 6 in all).
Hanging braziers on The hanging brazier (and other pieces that hang from a ceiling) snaps under floor tiles by where you aim: to a corner, the middle of an edge or the dead centre of the tile (on a 4 x 4 floor every metre).
Sconces on beams on A sconce aimed at a standing beam, pole or pillar goes flush against the side you aim at, centred on it and facing out from it, its height in 25 cm steps from the beam's foot.
Lanterns braziers and fire pit on The lava lantern, the standing braziers (also the blue one) and the iron fire pit snap onto floor tiles by the 3 x 3 zones and flush side by side; the lantern and the braziers also onto beams: centred on top of a standing beam or post, or on top of a lying beam (at an end or in the middle, by where you aim).
Item stands on Item stands snap too. The standing one like the lanterns: onto floor tiles by the 3 x 3 zones, flush side by side, and on top of beams. The wall one onto walls by where you aim: into a corner of the wall, flush with an edge and centred along it, or in the middle, facing out (a wall with snap points every 2 m counts as tiles); onto a standing beam like a sconce.
Cartography table on The cartography table snaps like furniture: flush side by side and against tables and benches, and onto floor tiles.